|
| |
|
|
These are manually operated piston type pumps in which body of the pump is used as the reservoir. On operating the handle piston gets actuated thus discharging the oil under pressure through outlet. These pumps are provided with check valve at suction and the relief valve is provided to Safe Guard the pump from overloading. The Models are given Below
MODEL |
RESERVOIR CAP. |
DISCHARGE |
Pr. SETTING |
| MLE-HP-250-4 |
250 ml |
4cc/Stroke |
12 Kg/cm2 |
| MLE-HP-600-6 |
600 ml |
6cc/Stroke |
15 Kg/cm2 |
| MLE-HP-1700-10 |
1700 ml |
10cc/Stroke |
15 Kg/cm2 |
| MLE-HP-2000-10 |
2000 ml |
10cc/Stroke |
15 Kg/cm2 |
|
|
|
|
Hydraulically / Pneumatically Operated Pumps |
These are piston type pumps which are operated by Hydraulic / Pneumatic pressure. The recommended input pressure in case of Hydraulic System is 15-20 bar and in pneumatic system it is 5 - 7 bars.
MODEL |
DESCRIPTION |
| MLE-HyP-2000-6 |
The reservoir capacity is 2 Ltr. Discharge/stroke is 6cc.
Input Hydraulic pressure is 18 Kg / cm2
Output pressure setting is 15 Kg/cm2 |
| MLE-PnP-2000-6 |
The reservoir capacity is 2 Ltr. Discharge/stroke is 6cc.
Input Hydraulic pressure is 5 Kg / cm2
Output pressure setting is 15 Kg/cm2 |
In both the above models float switch for sensing the minimum oil level is optional.
|
|
|
|
Oil Mist Lubricators |
The Oil Mist Lubricator is pneumatically operated system and the input pressure required is 4-6 Kg/cm2. This system is used for the automatic lubrication of machinery elements like Gears, Chains, Overheads, Conveyors, Bearings, Slides, Live Centres etc.
In the above system air is fed through air filter regulator & solenoid valve which is used as carrying media for oil forced out from the reservoir. The oil is checked by the hydraulic solenoid valve. The flow control valve are provided to control Oil and Air Flow. The oil is broken in small fragments by compressed air in the specially designed atomizer block. An electronic timer is also provided for intermittent application. The input power supply 220V, AC/110V, AC as per requirement. There are different models as mentioned below.
MODEL |
RESERVOIR CAPACITY |
| MLE-OMS-1500 |
Reservoir Capacity 1.5 Lts.
For Single Point. |
| MLE-OMS-5000 |
Reservoir Capacity 5.0 Lts.
Upto 8 Points. |
| MLE-OMS-25000 |
Reservoir Capacity 25.0 Lts.
For Multi Points. |
|
|
|
|
|
|
