|
|
These are manually operated Piston type Grease Pumps. Which are used for grease lubrications. The grease is injected to the lubrication points under pressure by these pumps.
MODEL |
RESERVOIR CAP. |
DISCHARGE |
Max. Pressure |
| MLE-GHP-500-2 |
500 grms |
2cc / STROKE |
60 Kg/cm2 |
| MLE-GHP-1500-6 |
1500 grms |
6cc/STROKE |
120 Kg/cm2 |
|
|
|
|
Multi Point Radial Lubricator |
The radial Lubricating System is used for ejecting predetermined lubricant wether it is soft grease or thick oil under pressure to different points of the lubrication. The system is best suited for machinery such as Cement plants, Sugar plants, Textile plants, Rubber Processing Plants, Chainsaw machine, Presses and Hammers.
MODEL |
RESERVOIR CAP. |
Max. Pressure |
No. of Pumping Units |
| MLE-RGL-5 |
5 KG |
150 KG/cm2 |
8 Nos. |
| MLE-RGL-9 |
9 KG |
DO |
10 Nos. |
| MLE-RGL-15 |
15 KG |
DO |
15 - 20 Nos. |
|
|
|
| |
Single Line / Dual Line Grease Lubrication System |
The Single line / Dual line Lubrication System is a perfect system to be used where the lubricating points are more than 20 nos. and are suited at far distance from each other. By this system Grease of consistency upto NLG-1-2 can be injected to different points of lubrications in the machine under heavy pressure. These systems are used in Cement plants, Sugar plants, Chemical Plants, Earth moving Equipments, Mining MAchineries, Coal and Mineral Industry, Mills and Crushers etc.
|
|
|
| |
|
|
